Repeat Playback Dvd Hd; Single Track Playback Dvd Hd; Auto Space Playback Dvd Hd - Tascam DV-RA1000HD Owner's Manual

• Delete the last track in the program list
using the ( ) key.
DEL
F2
• Confirm the playback order and return to
the previous screen using the
( ) key (if this screen was entered using
HOME
F5
the RC-RA1000, the home screen is shown).
• You can also use the remote control unit key
equivalents to perform these operations as
well as the number keys for direct program-
ming.
• When programmed playback mode is on,
pressing the switch on the play page of
PGM
the virtual front panel or the
the remote control unit briefly to turn pro-
grammed playback off. Pressing the
switch or key for at least one second
PGM
brings up the program screen.
Repeat playback
DVD
Use the Virtual Front Panel (see "The virtual front
panel (VFP)" on page 23) RPT
single-track and whole disc repeat (and off).
NOTE
The repeat function cannot be used with the single
play function. If either the single play or repeat
function is enabled, it is disabled when the other
function is enabled.
The remote control unit's
REPEAT
choices, but the RC-RA1000 also adds an A-B repeat
loop.
Single track playback
When the switch is turned on from the vir-
SNGL
tual front panel, or using the
RC-RA1000, the DV-RA1000HD plays to the end of the
current track only, and then stops playback.
Auto space playback
When the switch is turned on from the virtual front
ASPC
panel, the DV-RA1000HD inserts a gap of two seconds
between tracks when playing back a disc.
5 − CD playback & recording
key or
ENTER
key on
PGM
PGM
HD
switch to change between
key also allows these
DVD HD
key of the
SINGLE
DVD HD
NOTE
• If you turn programmed playback on while the
recorder is in playback ready mode or playing, a
track set to "ready" in the program list or a track
that is currently playing will be automatically reg-
istered in the program list.
If you turn programmed playback mode on while
the recorder is stopped, no track will be regis-
tered in the program list.
• If you press the
STOP
playback mode is on, the first track on the pro-
gram list will enter playback ready mode.
• If you press the
ENTER
screen is displayed and no track has been yet
registered in the program list, programmed play-
back mode will be turned off.
• During playback, you cannot delete any tracks in
the program list using the
• Pressing the
CANCEL
screen is being displayed will delete the regis-
tered program and programmed playback mode
will be turned off.
A-B repeat
Use the
A-B
unit to set the A and B points (these must be within the
same track). The first press sets the A point, the next
press sets the B point, and a third press cancels the
loop. Setting a point in another track clears the previous
settings.
Press the key to cancel the A-B repeat function.
STOP
NOTE
This function cannot be used together with repeat
playback.
This can be useful when recording to an analog tape
deck which can use these silences to detect track divi-
sions.
key while programmed
key while the program
(DEL) key.
F2
key while the program
key on the remote control
1
TASCAM DV-RA1000HD