Page 1
D01271700B DR-701D Linear PCM Recorder for DSLR OWNER'S MANUAL ENGLISH MODE D’EMPLOI FRANÇAIS MANUAL DEL USUARIO ESPAÑOL BEDIENUNGSANLEITUNG DEUTSCH MANUALE DI ISTRUZIONI ITALIANO 取扱説明書 日本語 ®...
Page 2
• TASCAM is a trademark of TEAC CORPORATION, registered in the U.S. and other countries. http://tascam.jp/ 〒206-8530 東京都多摩市落合1-47 • The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are TEAC AMERICA, INC. trademarks or registered trademarks of HDMI Licensing LLC in United States and other http://tascam.com/...
13 Unplug this apparatus during lightning storms or when unused for long periods of time. 14 Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply TASCAM DR-701D...
Page 4
When you store or dispose batteries, isolate their terminals with insulation tape or something like that to prevent them from contacting other batteries or metallic objects. • When throwing used batteries away, follow the disposal instructions indicated on the batteries and the local disposal laws. TASCAM DR-701D...
Disconnecting from a computer ........14 Quick reference for using various functions ... 15 Messages ................17 Troubleshooting ..............18 Specifications ..............19 Ratings....................19 Inputs and outputs ..............19 Audio performance ..............19 Recording times (in hours: minutes) .........19 General ....................20 TASCAM DR-701D...
• If this unit is placed near a power amplifier or Thank you very much for purchasing the TASCAM other device with a large transformer, it could DR-701D. cause a hum. If this occurs, increase the distance Before using this unit, read this Owner's Manual between this unit and the other device.
IN connector (3.5mm stereo mini jack) u DATA dial (ENTER) OUT connector (3.5mm stereo mini jack) Turn to select items and change values on setting screens. b LINE OUT jack (3.5mm stereo mini jack) i 3// button n TIME CODE IN connector TASCAM DR-701D...
(enter standby) if the empty When the unit's Home Screen is open, turn the DATA icon appears and blinks. dial to change the display contents. When using the TASCAM PS-P515U AC adapter (sold separately) or USB bus power, appears. 5 HDMI connection status This shows the HDMI connection status.
The unit turns off (enters standby) after it completes Install 4 AA batteries with their ¥ and ^ marks its shutdown process. as shown in the battery compartment. Close the battery compartment cover. TASCAM DR-701D...
IN connector. In addition, HDMI timecode can be received from the camera. 8 Connecting with HDMI monitor recorders Audio recorded by the DR-701D can be added to HDMI video input from a camera and then output To listen with an external monitoring system from the HDMI OUT connector.
PHONES jack, but the level meters will show the input sound Turn the DATA dial to change the setting. according to the recording mode. Press the DATA dial or MENU button to set a different item. TASCAM DR-701D...
Turn the DATA dial to switch the Home Screen to trim display mode. Use the 1–4 knobs to adjust the input levels. Guidelines are shown at −20dB and −12dB. Set levels so that they average around −20 dB and have a maximum level of −12 dB. TASCAM DR-701D...
Channels 1–4 and a stereo mix will all be recorded as a single file. Adjusting the volume OUT and LINE Adjust the volume output from the OUT jacks individually on the page. OUTPUT LEVEL Use the PHONES volume control to adjust the volume output from the PHONES jack. TASCAM DR-701D...
1/8 button to pause playback. Press This unit appears on the computer as an external drive named “DR-701D” (if the card has been the 1/8 button again to return to the beginning of formatted by this unit).
You can delete all the files in a folder at the same time. time Home Screen w MENU w MED IA w NEW FOLDER Folder Recording to a operations new folder Recorded files will be saved in this folder. TASCAM DR-701D...
Page 16
Use this to change the peak hold time. Adjust the levels Home Screen w MENU w SLATE TONE w OSCILLATOR of this unit and Oscillator connected Use this to output a signal at the set level. equipment TASCAM DR-701D...
Refer to this list if one of these pop-up messages MBR Error Init DATA dial while this message is appears on the DR-701D and you want to check the CARD being shown to format the card. meaning or determine a proper response.
¥/^ orientation. • Confirm that the input level setting is not too • Confirm that the AC adapter (TASCAM PS-P515U, high. sold separately) is securely connected to both the outlet and the unit. 8 Adjust the input knobs so that the PEAK •...
Connector: Type A receptacle 8 USB port Connector type: Micro-B Format: USB 2.0 HIGH SPEED mass storage class 8 TIMECODE IN connector Connector: BNC 8 REMOTE jack Connector: 2.5mm (3/32") TRS jack TASCAM DR-701D...
8 Power Operation Use conditions time 4 AA batteries (alkaline, NiMH or lithium) Channels 1/2 unused AC adapter (TASCAM PS-P515U, sold separately) Channels 3/4 use built-in mic External battery pack (TASCAM BP-6AA, sold Phantom power off About 7:30 separately) HDMI not connected...
Need help?
Do you have a question about the DR-701D and is the answer not in the manual?
Questions and answers