Table of Contents
Advertisement
What's in this Guide?
Receiving calls
Calling another (optional feature)
Tap Accept to accept the
incoming call or Reject to
reject it.
Do not disturb
The Do not disturb feature can be activated to
disable the incoming call alert signal. You may still
receive and place calls. Tap to activate—the icon will
then turn red and white. Tap again to deactivate.
D 14724.02 TANDBERG EX90 User Guide (TC3.1) June 2010
Introduction
Connecting EX90
Far end camera control
If the other end point permits it, you may even
control that camera. This is known as Far end
camera control. Tap Camera.
Using EX90
Receiving another call while already in a call
Calling another (optional feature)
(Optional feature)
23
The Settings
Web interface
If you already are in a call and someone
else calls you will get the following
options:
•
Accept the incoming call and join it
with the current call.
•
Accept the incoming call and put the
current call on hold.
•
Accept the incoming call and
disconnect the current call.
•
Reject the incoming call and continue
with the current call.
Pan and zoom the far end camera as needed. If
the other camera cannot be controlled, nothing
happens. Press Exit when finished.
Advertisement
Table of Contents
