Tandberg Gatekeeper Overview - TANDBERG Gatekeeper User Manual

TANDBERG Gatekeeper User Manual

1.1 TANDBERG Gatekeeper Overview

On the front of the Gatekeeper there are three LAN interfaces, a serial port (Data 1) and an LED
showing the power status of the system. The LAN 1 interface is used for connecting the system
to your network, LAN interface 2 and 3 are disabled. The serial port (Data 1) is for connection to
a PC, and power on is indicated by the Light Emitting Diode (Power) being lit.
Figure 1: Front panel of Gatekeeper
The back of the Gatekeeper has a power connector, a power switch, and a serial port (Data 2)
for connecting to a PC.
Figure 2: Rear panel of Gatekeeper
2