Snmp Settings - TANDBERG 150 MXP User Manual

Administrator Settings – Networks Settings

SNMP Settings

See General Settings – an overview
D 13640.04
MARCH 2006
for a description.
0
SNMP Trap Host identifies the IP-address of the SNMP
manager. SNMP (Simple Network Management Protocol,
SNMP Ver 1) is used for monitoring and configuring
of different entities in a network. The system's SNMP
Agent responds to requests from SNMP Managers (a PC
program etc.). SNMP traps are generated by the agent
to inform the manager about important events.
Traps can be sent to multiple SNMP Trap Hosts. Enter
the IP address of up to three SNMP managers. All traps
will then be sent to the hosts listed.
SNMP Community names are used to authenticate
SNMP requests. SNMP requests must have a
'password' in order to receive a response from
the SNMP agent in the codec. Note that the SNMP
Community name is case sensitive. The default
password is public.
TANDBERG 150MXP
USER GUIDE