KidKraft Summerhill F29050 Installation And Operating Instructions Manual page 37

Step 13: Access Ladder Assembly
Part 3
E: On the inside bottom of (2846) Ladder Rail Right attach 1 (9195) Ladder Brace using 2 (S11) #8 x 2" Wood
Screws keeping it flush to (2769) Panel BT Frame. (fig. 13.7 and 13.8)
F: From inside the Fort measure approximately 3" (82.5mm) from the bottom of the End Wall. Pre-drill 2 holes
using a 1/8" (3.2mm) drill bit. Install 2 (S4) #8 x 3" Wood Screws through the (2769) Panel BT Frame and into the
(9195) Ladder Brace as shown in (fig. 13.8).
Fig. 13.7
End Wall
2769
Wood Parts
1 x Ladder Brace 31.8 x 76.2 x 482.6mm
9195
2846
S11
9195
Hardware
2 x #8 x 2" Wood Screw
S11
2 x #8 x 3" Wood Screw
S4
Fig. 13.8
View From Bottom
2846
#8 x 3" Wood Screw
#8 x 3" Wood Screw
#8 x 2-1/4" Wood Screw
37
S4
predrill 2 holes
82.55
2769
9195
S11
view from bottom
predrill 2 holes
view from bottom
predrill 2 holes