Attach Gables To Fort - KidKraft Summerhill F29050 Installation And Operating Instructions Manual

Step 20: Attach Gables to Fort
A: Center 1 Gable Assembly on the top of each wall panel as shown in fig. 20.2 making sure that the assemblies
are flush with the front of the wall panels. Attach each Gable Assembly to the panel using 4 (S4) #8 x 3" Wood
Screws per assembly making sure that the end screws are going in on an angle. (Fig. 20.2, 20.3, 20.4, 20.5 and
20.6)
Fig. 20.2
cetre on each fort face
C
Gable
Assembly
Fig. 20.3
flush
cetre on each fort face
Center on each fort face
cetre on each fort face
Fig. 20.4
flush
Gable Assembly
cetre on each fort face
flush
flush
S4 flush
Flush
16 x
4X #8 x 3" WS PER Gable End
Fig. 20.1
flush
4X #8 x 3" WS PER Gable End
Gable
Assembly
Fig. 20.5
4X #8 x 3" WS PER Gable End
Fig. 20.6
4X #8 x 3" WS PER Gable End
4X #8 x 3" WS PER Gable End
Hardware
#8 x 3" Wood Screw
S4
46
4X #8 x 3" WS PER Gable End
Make sure the end
S4
screws are going in
on an angle
S4