KidKraft Summerhill F29050 Installation And Operating Instructions Manual page 36

Step 13: Access Ladder Assembly
Part 2
D: On the Back Wall of the assembly and to the right, place Ladder Assembly against (2618) as shown in fig.
13.5 making sure that it is flush. Pre-drill holes with a 1/8"(3.2mm) drill bit then attach using 2 (LS3) 1/4 x 3" Lag
Bolt (with flat washer). (fig. 13.6)
Fig. 13.5
Flush
2618
LS3
Hardware
2 x 1/4 x 3" Lag Bolt (with flat washer)
LS3
36
Fig. 13.6
Flat
Washer