Programmable Keys; Control Keys - Siemens HiNet LP5100 Operation And Administration Manual

Programmable keys

Control keys

The HiNet LP5100 is equipped with 16 user-programmable keys
in two levels, with four of these keys being preassigned in the first
level:
If you press one of these keys, the corresponding LED will go on
until the preprogrammed function is carried out.
If you call a key from the second level, press the "Shift" key first
and then the required function key.

The two control keys
pad. Depending on the operating mode, you can vary the following
settings:
Operating mode
Receiving a call
Handsfree talking
Using the handset
to telephone
Setting in the menu
"Service"/"Audio
Settings"
Display and operator's controls
LED off
LED on
and are located below the dialing key-

key
Reduce the volume
of the ringer tone
Reduce the volume
of the loudspeaker
in the base unit
Reduce the volume
of the handset
loudspeaker
Adjust loudspeaker, handset, key click and
ringer volumes,
vary the sequence and melody of the
ringer tone
key
Increase the volume
of the ringer tone
Increase the volume
of the loudspeaker in
the base unit
Increase the volume
of the handset
loudspeaker
13