Table of Contents
Advertisement
Dialing with handset replaced
Switching handsfree/handset
Switching loudspeaker on
18:10
Page forward with
722_
Dial?
72261496
Dial?
72261496
calling
72261496
ringing
You will hear the dial tone from the loudspeaker in the base unit.
As soon as the subscriber answers, you can pick up the handset
and make the conversation. During the conversation, you will see
the standard display for an active connection:
72261496
Consultation?
You can replace the handset during a telephone call and continue
with the conversation in handsfree mode.
G
Keep the key "Loudspeaker" pressed and replace the hand-
set. The loudspeaker and the microphone in the base unit are
switched on.
You can pick up the handset during the telephone call in handsfree
mode in order to continue your call.
G
Pick up the handset during the handsfree call. The loudspea-
ker and the microphone in the base unit are switched off.
If any persons present in the room should also hear what's being
said during the telephone call that you are making by means of the
handset:
G
Press the key "Loudspeaker".
The voice of the called party can be heard over the loudspea-
ker in the base unit.
20.06.98
Display of the basic menu
>
Enter the call number
Confirm the call number
entered
Press this key to hear the
dial tone
The loudspeaker is
switched on
The dialing process is
confirmed
The ringing tone signal
sounds
The active connection is
displayed
>
Operation
28
Advertisement
Table of Contents
