Feature Keys; Programmable Keys - Siemens HiPath DX User Manual

Feature keys

Your telephone has four feature keys with associated lamps. To make
and fit an inlay to identify the keys, see page 8.
The feature keys are used for handling calls:
• Message Waiting - see page 16
• Redial - redials the last number you called, see page 17
• Enquiry (R) - is used to make an enquiry/consultation call or transfer a
call, see pages 18, 19 and 20
• Hands-free or Headset - see pages 14, 21 and 22

Programmable keys

Your telephone has eight or more programmable keys with associated
lamps. Each key has two stores; use the Shift key to access the second
store. You can use the programmable keys to store telephone numbers
or features. However, if you are part of a keysystem group some of the
keys are pre-programmed.
• To program a telephone number, see page 31.
• To program the Message Waiting key, see page 32.
• To program a feature, and for more information about keysystem
group working, see the online guide.
To make and fit an inlay to identify the keys, see page 8.
Volume control keys
Use the and – keys to adjust the volume of ringing and speech during
a call, see page 13.
Headset working
If your telephone has a headset socket, you can use it with an approved
headset, see page 22.
Introduction
5