Table of Contents
Advertisement
Assigning the Mute function to a function key
You have a total of 16 function keys in two levels (= 32 key assign-
ments) at your disposal for programming them with call numbers
or functions. One function is assigned to four function keys on de-
livery:
– loudspeaker
– number redial
– missed calls and
– shift
You can change the assignments even for these four keys as
required. The procedure is very easy and explained below by an
example.
During your telephone calls, you often want to switch off the micro-
phone and then switch it on again, and therefore you would like to
assign this function to one function key:
18:10
Page forward with
18:10
Service?
Service
4=Function keys?
Function Keys:
Press required key
Function keys
08=Mute?
The new function is assigned to the function key.
20.06.98
Display of the Basic menu
>
Go to "Service?"
20.06.98
Call the "Service" menu
>
Go to "Function keys"
Call the menu
"Function keys"
>
Press the function key to
be programmed
Go to "Mute"
Choose the displayed
function
>
A signal will sound to
confirm
Operation
36
Advertisement
Table of Contents
