Programmable Sensor Keys - Siemens OpenStage 40 User Manual

Programmable sensor keys

Your OpenStage 40/40 G has six illuminated sensor keys to which you can
assign functions or numbers.
Increase the number of programmable sensor keys by connecting a
key module
Mirea, Ch
Shift
Depending on how they are programmed, you can use the sensor keys as:
• Function keys
• Repdial/Direct station selection key
Only for repdial keys can you also program the second level for di-
rect destination selection.
The configuration of direct station selection keys must be activated
by your service personnel.
Direct station selection keys can be assigned an internal number
from the HiPath 4000 network.
A typical application of direct station selection keys is the execu-
tive-secretary configuration
Touch the key to activate the programmed function or dial the stored num-
ber.
Press the key to open a menu for programming it
A label for the function is displayed to the left of the key; it cannot be
changed. You can define the labeling for repdial or DSS keys according to
your requirements
The status of a function is shown by the LED on the corresponding sensor
key.
Meaning of LED displays on function keys
LED Meaning of function key
S
Off The function is deactivated.
T
[1]
Flashing Indicates the function status.
R
On The function is activated.
[1] In this manual, flashing sensor keys are identified by this icon, regardless of the flashing
interval. The flashing interval represents different statuses, which are described in detail in
the corresponding sections of the manual.
The programmable sensor keys on multi-line phones function as
line keys
page 17.
page 81
page 120.
page 85.
page 103.
Getting to know your OpenStage phone
page 82
page 81.
21