Programmable Sensor Keys - Siemens OpenStage 60 SIP Operating Manual

Getting to know your OpenStage phone

Programmable sensor keys

Your OpenStage 80 has nine (OpenStage 60: eight) illuminated sensor
keys. You can assign functions or numbers to them.
To open the programming menu, press and hold down the relevant sensor
key
To activate the programmed function, briefly press the relevant key
Depending on how they are programmed, you can use the sensor keys as:
•
•
•
Touch the key briefly to activate the programmed function or dial the stored
number
If you hold the key pressed, you are prompted as to whether to start pro-
gramming this function key.
A label indicating the key's function is displayed to the left of the key; it can-
not be changed. You can change the labels for repdial keys according to
your requirements.
The status of a function is shown by the LED on the corresponding sensor
key.
Meaning of LED displays on function keys
LED
S
T
R
[1] In this manual, flashing sensor keys are identified by this icon, regardless of the flashing in-
24
page 81.
page 86.
Increase the number of programmable sensor keys by connecting a
key module
Function keys page 80
Repdial keys page 80
Direct station selection keys
page 86.
If the prompt is not displayed or a programmed function is not exe-
cuted, then you can only launch key programming via the user menu
(ask your service personnel about the current setting).
Line and DDS keys can only be programmed by service personnel
via the service menu.
Meaning of function key
Off The function is deactivated.
1
Flashing Indicates the function status.
On The function is activated.
terval. The flashing interval represents different statuses, which are described in detail in
the corresponding sections of the manual.
page 18.
page 120