Table of Contents
Advertisement
HiNet system without DHCP server
If there is no DHCP server integrated into your HiNet environment,
you have to enter the IP address manually via your dialing keypad.
When DHCP is set off and the terminal does not have a configured
IP at start up, the screen "No IP address" is displayed. You have
to enter the admin menu and configure it manually. This will re-
quire a restart to take effect.
The following display will appear:
Enter admin password
******
Enter IP Addr
000.000.000.000
Enter IP Addr
128.098.053.008
Having entered the IP address, you have to enter your own tele-
phone number:
Enter E164
_
Enter E164
1228
If the HiNet password is not yet configured you will be prompted:
Enter Hinet password
******
LP5100
Initialising...
After your own telephone number has been entered, the telepho-
ne will change over to its normal operating mode (Basic menu).
You can now receive and make calls.
13:15
Page forward with
If there is an SNTP server integrated into your HiNet environment,
the date and time are automatically loaded to the telephone. If the-
re is no SNTP server, you have to set the date and time manually.
For more details on this, please read the chapter "Settings".
Enter the administrator
pasword and
confirm
Enter the IP address as-
signed to this telephone
and use
to confirm the IP ad-
dress
Enter the telephone
number assigned to this
telephone and use
to confirm the input
number
Enter the HiNet pasword
and
confirm
Vxx.yy
>
20.06.98
Basic menu
>
Setting into operation
17
Advertisement
Table of Contents
