Section 4: Registration; Registering The Gsmhs; Registering Through Alarmnet Direct Website - Honeywell AlarmNet GSMHS Installation And Setup Manual

                                                

Registering the GSMHS

Once you have initialized and programmed the GSMHS, it must be registered to enable the
account. An unregistered GSMHS is indicated on the Status Display as: Status lit, Message
slow blinking, and Fault not lit.
Figure 4-1. Unregistered GSMHS Status Display In Normal Operation
Throughout this document, the following key is used to describe LED state:
Upon completion of the registration process, a GSMHS transmits a registration message and
receives a registration validation indicating that the account is now enabled. Wait for the
"Registration Success" message to appear, regardless of the registration method used.
You can register the GSMHS by one of the following methods:
 Through the AlarmNet Direct website
 Through use of the Tamper Switch
 Through use of a 7720P Programming Tool
 By phone

Registering through AlarmNet Direct Website

The GSMHS can be registered through the AlarmNet Direct Website. To program the
module via the website (if you are already signed up for this service), go to:
https://services.alarmnet.com/AlarmNetDirect/userlogin.aspx.
Log in and follow the on-screen prompts.
If you are not signed up for this service, click on "Dealer Signup" from the login screen to
gain access to the Honeywell web-based programming.
Dealer Sign-Up Direct Link: https://services.alarmnet.com/AlarmNetDirectP_Sign-Up.
You will be instructed how to proceed upon completing the sign-up form. Only one sign-up
per dealer is required. Once an initial user is established, additional logins may be created
by that user.
NOTE: Central Stations sign up by contacting AlarmNet Administration at 800-222-6525
option 3.
Please have the following information available when programming the device:
1. Primary City ID (two-digit number)
STATUS, GREEN
MESSAGE, YELLOW
FAULT, RED
ON OFF FAST BLINK
Figure 4-2. LED Key
S E C T I O N
Registration
SLOW BLINK
4
4-1