Table of Contents
Advertisement
Boot
Numlock
This allows you to determine the default state of the numeric keypad at boot. By
default, the system boots up with Num Lock on. When set to Off, the function of the
numeric keypad is the arrow keys.
Boot Type
Select the boot type. The options include Legacy Boot Type (the default) and UEFI
Boot Type.
Network Stack
Enable or disable network stack. It supports the operation of these functions or
software: Windows 8 BitLocker Network Unlock and UEFI IPv4/IPv6 PXE or legacy PXE
OPROM.
PXE Boot Capability (UEFI mode)/PXE Boot to LAN (legacy mode)
Enable or disable Preboot eXecution Environment (PXE) boot through an Ethernet port.
This function can only be enabled if the Network Stack support is enabled under the
UEFI Boot Type.
Chapter 7 BIOS Setup
Chapter 7
USB Boot
Enable or disable USB boot from a flash drive.
Quiet Boot
Enable or disable the quiet boot function to configure the screen's display between
POST messages or the OEM logo at bootup. Select Disabled to display the POST mes-
sages and select Enabled to display the OEM logo.
36
Advertisement
Table of Contents
