Table of Contents
Advertisement
Super I/O
This section configures the system super I/O chip parameters.
COM Port 1 to COM Port 5
Enable or disable the serial port (COM).
Device Settings
It shows the IO/IRQ settings for the COM port.
COM Type
(only available for Serial Port 1 and 3)
Configure the serial port mode. The settings are RS232, RS422 and RS485 for COM
Port 1, and RS232 and CC-TALK for COM Port 3.
WDT
Enable or disable the watchdog function (default: diabled). A counter will appear if
you select to enable WDT. Input any value between 1 and 255 (seconds).
Chapter 7 BIOS Setup
Chapter 7
PC Health Status
This section displays PC health status.
33
Advertisement
Table of Contents
