Table of Contents
Advertisement
Security
This section configures the Trusted Platform Module (TPM) function.
TPM Availability
Show or hide TPM availability and its configurations.
TPM Operation
Select one of the supported operation: Enable, Disable, or No Operation.
• No Operation: No changes to the current state. This is the default setting.
• Disable: Disable and deactivate TPM.
• Enable: Enable and activate TPM.
Clear TPM
Remove all TPM ownership contents.
Chapter 7 BIOS Setup
Chapter 7
Set Supervisor Password
Set the administrative password for entering the BIOS utility or upon the entering of
the power-on self-test (POST) process. The length of the password must be greater
than 1 character and less than or equal to 10 characters.
Power-on Password
If you select to set the supervisor password, this option will be shown. Enable or dis-
able the system to require password at boot.
35
Advertisement
Table of Contents
