Table of Contents
Advertisement
ACPI Configuration
This section configures system ACPI parameters.
Wake on LAN
Enable or disable WOL (wake-on-LAN) to wake the system through an Ethernet adapter.
The default is disabled. The default is disabled.
Wake on RTC from S5
Enable or disable the resume on RTC alarm function, which automatically powers on the
system from S4 (suspend to disk) or S5 power state (soft-off state) at the specified time
every day. The default is disabled.
Wake up hour
Input any value between 0 and 23.
Wake up minute
Wake up second
Chapter 7 BIOS Setup
Input any value between 0 and 59. Suspend to Disk
Input any value between 0 and 59.
Chapter 7
CPU Configuration
This section configures the CPU.
SVM Support
Enable or disable the CPU virtualization function. The default is enabled.
29
Advertisement
Table of Contents
