Table of Contents
Advertisement
Exit
Exit Saving Changes
Select this field and press <Enter> to exit BIOS setup and save your changes.
Load Optimal Defaults
Select this field and press <Enter> to load the optimal defaults.
Discard Changes
Select this field and press <Enter>to exit the BIOS setup without saving your changes.
Chapter 7 BIOS Setup
Chapter 7
Updating the BIOS
To update the BIOS, you will need the new BIOS file and a flash utility. Please contact techni-
cal support or your sales representative for the latest BIOS file and the firmware update utility.
For instructions on how to update BIOS with the flash utility, please see
knowledge/video/31
from the Knowledge Base of the DFI website.
R
Read file successfully. (path= "platform.ini")
Insyde H20FFT (Flash Firmware Tool) Version (SEG) 100.00.08.10
Copyright(c) 2012 - 2016, Insyde Software Corp. All Rights Reserved.
Current BIOS Model name: GM330
New BIOS Model name: GM330
Current BIOS version: 68.08A
New BIOS version: 68.08A
0%
C:\GM330>_
37
https://www.dfi.com/
|
|
Information
Please do not remove the AC power
Initializing
Updating Block at FFFFF000h
25%
50%
75%
100%
100%
Advertisement
Table of Contents
