Toyota UH9000S Fitting Instructions Manual page 4

REMOVAL
Removal - Engine Bay
1. Open the bonnet.
2. Remove the radiator shroud (13 scrivets).
Push in the centre of the scrivets and pull up the shroud to
remove. Take care to retain all scrivets.
3. Disconnect the (-) negative battery terminal cable.
4. Disconnect the positive (+) terminal cable.
5. Remove the battery retaining bracket and hook.
6. Remove the battery and store safely.
Use a flat blade screwdriver to unclip (2) the relay box
7.
located at the passenger's side firewall. Lower the fuse
box to gain access to the firewall grommet.
UH9000S / UH9060S / UH9080S
Page 4 of 16
Fitting Instructions