Toyota UH9000S Fitting Instructions Manual page 15

Fitting Instructions
UH9000S / UH9060S / UH9080S
Speaker Microphone
UH9000S
1. Hang the speaker microphone on the hanger and connect
the cable to the UHF CB transceiver. Ensure the speaker
microphone cable routing does not interfere with any of the
vehicle's controls.
NOTE: Models UH9060S / UH9080S are supplied with a
speaker microphone extension cable which can be used if
required.
UH9060S / 9080S
1. Hang the speaker microphone on the hanger and connect
the cable to the speaker microphone extension cable.
Ensure the speaker microphone cable routing does not
interfere with any of the vehicle's controls.
WARNING
If the indicated location is not suitable, do not install the
hanger and speaker microphone in a location that may
interfere with the operation and deployment of the SRS
airbags or seatbelt pretensioners, including driver, front
passenger and knee SRS airbags if fitted. Doing so may
result in serious injury or death.
Page 15 of 16