Toyota UH9000S Fitting Instructions Manual page 13

Land cruiser prado uhf cb transceiver

Hide thumbs Also See for UH9000S:

Fitting Instructions

UH9000S / UH9060S / UH9080S

Slide the UHF CB transceiver into the cradle and connect

the power lead.

Fit the antenna adapter (supplied) to the antenna cable

and connect to the UHF CB transceiver.

UH9060S / UH9080S

Fold back the insulation padding from the underside of the

front passenger's side instrument panel under cover sub-

assembly. Secure the UHF CB transceiver cradle in the

position shown using the double sided tape provided.

Trim double sided tape to suit..

WARNING

If the indicated location is not suitable, do not install the

UHF CB transceiver cradle and radio in a location that may

interfere with the operation and deployment of the SRS

airbags or seatbelt pretensioners, including driver, front

passenger and knee SRS airbags if fitted. Doing so may

result in serious injury or death.

Assemble the (2) slide mount brackets to the UHF CB

transceiver using the (2) screws supplied.

Page 13 of 16

Uh9080s Uh9060s