Toyota UH9000S Fitting Instructions Manual page 6

4. Remove the passenger's side front console box insert
(2 clips [ ], 1 guide).
Prise off carefully at retaining clip locations to avoid
damaging the clips and insert.
5. Remove the driver's side front console box insert
(2 clips [ ], 1 guide).
Prise off carefully at retaining clip locations to avoid
damaging the clips and insert.
6. Place protective tape along both sides of the centre
console. Using a trim removal tool carefully prise down
from the top of the rear console end panel sub-assembly to
unclip and expose the rear power socket wiring
(4 clips [ ]).
UH9000S / UH9060S / UH9080S
Page 6 of 16
Fitting Instructions