Changing A Name/Room - HomeMatic HM-PB-4Dis-WM Mounting Instruction And Operating Manual

8.3 Changing a name/room

A name (e.g. Light) and a room (e.g. Living room)
can be stored for every device taught-in to the wall-
mounting pushbutton or for every channel.
You can choose from a selection of preset names
or enter a customised name with a maximum of 12
characters.
The name of a device and that of a room are
changed in the same way, so just one example is
given below to explain both processes.
• Open the configuration menu by
pressing and holding down the
button on the left or right ().
• The top menu level appears on the
display. Press the button on the
left/right () to select the menu
item "Channels".
• Press the button at the bottom () to access the
next menu level.
• In the next menu level you can
select a storage position (channel)
by pressing the button on the left/
right (). This example refers
to the device called "Position" in
room "1".
50