General System Information About Homematic - HomeMatic HM-PB-4Dis-WM Mounting Instruction And Operating Manual

Display standby: The display switches to
standby mode after approximately 10 sec-
onds to maximise battery life. Pressing any
one of the four sides of the pushbutton rocker will
reactivate the display. On reactivation, the first chan-
nel or position 1 is displayed by default. The (stand-
by) time is set as described in Section 8.7.
Menu time-out: The configuration menu is
opened by pressing the button and holding it
down (for longer than 4 seconds). After 60 sec-
onds of inactivity the menu closes automatically and the
wall-mounting pushbutton returns to operation mode.
5. General information
about the HomeMatic system
This device is part of the HomeMatic home control
system and works with the bi-directional BidCoS
wireless protocol. All devices are delivered in a stand-
ard configuration. The functionality of the device can
also be configured with a programming device and
software. The additional functions that can be made
available in this way and the supplementary functions
provided by the HomeMatic system when it is com-
bined with other components are described in the
HomeMatic System Manual.
®
41