Restoring The Factory Settings - HomeMatic HM-PB-4Dis-WM Mounting Instruction And Operating Manual

• Confirm your selection by pressing "Save" ().
• To exit without saving your changes, press
"Back" ().

8.6 Restoring the factory settings

The wall-mounting pushbutton can be reset to its
initial state. When the factory settings are restored,
all saved settings and links are lost. To restore the
factory settings, proceed as follows:
• Open the configuration menu by
pressing and holding down the
button on the left or right ().
• Then press the button on the left/
right () to select the menu item
"Settings".
• Press the button at the bottom () to access the
next menu level.
• In the next menu level select the "Factory set."
item by pressing the button on the left/right ().
56