Assigning customised names/Edit mode:
• Launch edit mode by pressing
and holding down the button on
the left or right () for more than
4 seconds.
• Press the button on the left/
right () to select the 12 digits
individually. Press the button at the
top/bottom () to change the
corresponding digit.
• You can toggle between upper/
lower case and special characters
by pressing and holding down the pushbutton at
the top/bottom ().
• Press and hold down the button on the left or right
() to save the name and exit edit mode.
• In the example on the right,
both the device and room
names have been changed.
• The actuator taught-in to
position/channel 1 controls
the decorative light in the living
room.
52