HomeMatic HM-PB-4Dis-WM Mounting Instruction And Operating Manual page 58

• Open the configuration menu by
pressing and holding down the
button on the left or right ().
• Then press the button on the left/
right () to select the "Settings
menu" item.
• Press the button at the bottom ()
to access the next menu level.
• In the next menu level select the
"Standby" item by pressing the
button on the left/right ().
• Confirm your selection by pressing
the button at the bottom ().
• You can change the standby time
by pressing the button on the left/
right (). Press the button and
hold it down to change the time in
increments of 10 seconds.
• Select "Back" or press the button
at the top () to end the procedure without saving
your changes.
• Select "Save" or press the button at the bottom
() to save the standby time you have just set.
58