Start Up; Installing And Changing Batteries; Installing Batteries; Changing Batteries - HomeMatic HM-RC-12-B Operating Manual

6

Start up

6.1

Installing and changing batteries

6.1.1

Installing batteries

Open the rear battery compartment by pushing the battery cover
in the direction of the arrow. Insert the three Micro batteries (Type
LR 03) that are supplied and make sure that the polarity matches
that of the markings in the battery compartment.
Close the battery compartment by putting the battery compart-
ment cover back on and pushing it in the opposite direction of
the arrow until the cover clicks into place.
6.1.2

Changing batteries

Caution! Danger of explosion if battery is replaced im-
properly.
If there is no reaction from the device that you want to control
when you press a button or if the flash-code for empty batte-
ries is shown, the used batteries are to be replaced with three
new batteries of type LR03 (Micro) as described in the previous
chapter. Make sure that the batteries are inserted with proper
polarity.
24
Used batteries are not to be disposed of with the
house-hold waste! Please dispose them at your
local battery collection point!