HomeMatic HM-PB-4Dis-WM Mounting Instruction And Operating Manual page 48

the left/right () to browse through the different
items in that menu level.
• Select the "teach-in" item menu by pressing the
button at the bottom () .
• In the next menu level you can
select a storage position (channel)
by pressing the button on the left/
right (). The next available
position is displayed for selection
first.
• Confirm your selection by pressing the button at
the bottom ().
In order to teach in at a central control unit,
select the "Central control
unit" entry (press button ).
• You can now activate the teach-in
procedure by pressing the button
at the bottom (). For the next
20 seconds the wall-mounting
pushbutton will search for another HomeMatic
component that is also in teach-in mode.
• This means that the device to be taught-in needs
to be switched to teach-in mode during this time
too.
48