HomeMatic HM-PB-4Dis-WM Mounting Instruction And Operating Manual page 45

"top" is printed). To attach the adhesive strips,
remove the protective film from one side. The
ends of the adhesive strips must protrude from the
cut-out areas (b) at the top of the mounting plate.
b
• Pull the protective film off the other
side of the adhesive strips.
• You can now stick the
mounting plate for the wall-
mounting pushbutton onto
the wall at the required site.
When the plate is stuck in
place, the word "top" (c)
must be visible. Briefly press
the wall mount firmly against
the wall.
• Then slide the wall-mounting pushbutton onto the
holder from above.
b
c
45