8.4 Teaching-out
Devices that have been taught-in to the wall-
mounting pushbutton can also be taught-out again.
Teaching-out is performed separately for each
channel/position. To teach-out devices, proceed as
follows:
• Open the configuration menu by
pressing and holding down the
button on the left or right ().
• The top menu level appears on the
display. Press the button on the
left/right () to select the
"Channels menu" item.
• Press the button at the bottom
() to access the next menu level.
• In the next menu level you can
select a storage position (channel)
by pressing the button on the left/
right (). In this example, the
"Decorative light" device in room
"Living room" has been selected.
• Confirm your selection by pressing
the button at the bottom ().
53