HomeMatic HM-PB-4Dis-WM Mounting Instruction And Operating Manual page 49

• Once teaching-in has been
completed successfully,
the device and room names
can be changed.
• After teaching-in has been
completed, "Position" is initially
stored as the name and the associated number is
stored for the room (in this example, "1").
• Press the button on the left/right () to toggle
between "Change name" and "Change room".
• Confirm your selection by pressing the button at
the bottom ().
Once you have made your selection you can
either choose a preset name or room, or
define your own. For details on this, please
refer to Section 8.3.
The wall-mounting pushbutton features
10 channels, also referred to as "positions"
in the following. Up to 10 HomeMatic devices
can be taught-in to each channel. If several devices
have been taught-in to one channel, they are
referred to as a group. A switching operation will be
triggered for all the devices in the group
simultaneously.
49