SETUP - REMOVE CHILD SEAT FROM VEHICLE
FOR REARWARD FACING
5
6
7
38
Instructions for Installation & Use
Remove infant insert (if fitted).
IMPORTANT - Ensure buckle tongues are
placed into buckle tongue holders prior to
opening CLICKTIGHT frame.
Step 5. To open CLICKTIGHT frame, twist
and push the CLICKTIGHT button.
Allow frame to lift.
Step 6. Open CLICKTIGHT frame fully.
Step 7. Remove vehicle seatbelt from blue
REARWARD FACING BELT PATH.
SETUP - STORE REBOUND BAR
1
2
3
4
Push down
5
1
FOR REARWARD FACING
STORE REBOUND BAR:
Step 1. Press the grey release rebound bar
button to unlock the rebound bar.
Step 2. Store the rebound bar away.
Step 3. Ensure harness adjuster strap is not
under rebound bar.
Step 4. Re-attach the flap at the front of the
child seat.
NOTE: Remove any excess shoulder/
lap straps, harness tongues and
harness adjuster strap (lower) out from
under the CLICKTIGHT frame.
Step 5. Close CLICKTIGHT frame and press
down until it locks into place.
CLOSE ADVANCED SIDE IMPACT
CUSHION TECHNOLOGY :
Step 1. Rotate clockwise to close.
Instructions for Installation & Use
39