Britax Safe-N-Sound BS3700A-C20133 Series Instruction Manual page 14

SETUP - CLICKTIGHT FOR REARWARD FACING
1
2
26
Instructions for Installation & Use
HOW TO INSTALL CLICKTIGHT:
Remove infant insert (if fitted).
IMPORTANT - Ensure buckle tongues are
placed into buckle tongue holders prior to
opening CLICKTIGHT frame.
Step 1. To open CLICKTIGHT frame, twist
and push the CLICKTIGHT button.
Allow frame to lift.
Step 2. Open CLICKTIGHT frame fully.
SETUP - CLICKTIGHT FOR REARWARD FACING
VEHICLE SEATBELT
Lap
Sash belt
belt
3
4
5
6
Step 3. Lengthen vehicle seatbelt.
Step 4. Feed vehicle seatbelt through blue
REARWARD FACING BELT PATH
guide, ensure the seatbelt is not
twisted during installation.
Step 5. Continue feeding vehicle seatbelt
through opposite blue REARWARD
FACING BELT PATH guide.
Step 6. Engage the vehicle seatbelt buckle
and tongue without twisting seatbelt.
ENSURE THERE ARE NO TWISTS IN
SEATBELT. REMOVE SLACK.
NOTE: Seatbelt extenders should not be used
if the seatbelt is not long enough to secure the
child restraint. If they are used then the buckle
must not enter the seating zone.
Instructions for Installation & Use
27