Installing Into Your Vehicle; Top Tether - Britax Safe-N-Sound BS3700A-C20133 Series Instruction Manual

SETUP - INSTALLING INTO YOUR VEHICLE
FOR REARWARD FACING
2
Pull
1
Press
3
Press
4
22
Instructions for Installation & Use

INSTALLING INTO YOUR VEHICLE:

Step 1. Press harness adjuster button.
Step 2. Place your hand under both shoulder
harness straps, then pull shoulder
harness straps to lengthen.
Step 3. Disengage buckle by pressing red
button.
Remove infant insert (if fitted).
Step 4. Place buckle tongues into buckle
tongue holders.
SETUP - INSTALLING INTO YOUR VEHICLE
5 5
Top tether behind the child seat
6
FOR REARWARD FACING
Choose the vehicle seat position.
Step 5. Ensure child seat is against vehicle
seatback - the rebound bar does not
need to contact vehicle seatback.
If desired, this gap may be packed
(see page 25).
Do not have the seat too far away from
the vehicle seat.
Step 6. Temporarily place top tether and
attachment clip over the back of child
seat.
Instructions for Installation & Use
23