Set Up; General Information; Forward Facing Recline Positions - Britax Safe-N-Sound BS3700A-C20133 Series Instruction Manual

SETUP - GENERAL INFORMATION
FOR FORWARD FACING
1
2
4
3
DO NOT USE RESTRAINT IN FORWARD-FACING MODE WITH THE REAR FACING MODE
REBOUND BAR PULLED OUT.
Do not use the restraint without the top tether strap correctly attached.
If your vehicle is not fitted with an anchor point, please contact a Safety Restraint Fitting
Station authorised by the relevant State Government Body for correct fitment of the restraint.
In New Zealand contact the agent for the vehicle. The top tether strap must be attached to an
upper anchorage point using an extension strap if necessary.
Do not use on any vehicle seat which faces sideways or rearwards.
If an airbag is fitted in the desired seating position where the child restraint is fitted, follow the
vehicle manufacturer's warnings and instructions.
42
Instructions for Installation & Use
TRANSITION FROM REARWARD
FACING TO FORWARD FACING
MODE:
If you are converting your seat from rearward
facing to forward facing for more information
refer to page 39 to store rebound bar.
Step 1. Press the grey release rebound bar
button to unlock the rebound bar.
Step 2. Store the rebound bar away.
Step 3. Place one hand on the child seat back
and with the other hand on the grey
recline lever, squeeze upwards.
Step 4. Rotate child seat into an upright
position.
SETUP - FORWARD FACING
RECLINE POSITIONS
FORWARD FACING RECLINE
POSITIONS:
When you convert your child seat to forward
facing mode, there are four, simple to use
forward facing recline positions you can choose
from to ensure your child travels as comfortably
as possible.
AWAKE LAZE NAP
Step 1. To adjust to the different recline
positions. Use the grey recline lever to
rotate the child seat.
1
Instructions for Installation & Use
SLEEP
43