Britax Safe-N-Sound BS3700A-C20133 Series Instruction Manual page 25

SETUP - CLICKTIGHT FOR FORWARD FACING
Pull
6
7
48
Instructions for Installation & Use
Step 6. Remove any slack from the vehicle
seatbelt.
Feed sash belt slack back into the
seatbelt retractor.
ALWAYS REMOVE SLACK FROM
SEATBELT.
ENSURE THERE ARE NO TWISTS IN
SEATBELT.
Step 7. Always remove any excess shoulder/
lap straps, harness tongues and
harness adjuster strap (lower) that
may become trapped under the
CLICKTIGHT frame.
SETUP - CLICKTIGHT FOR FORWARD FACING
8
Push down
9
Lift
10
11
Step 8. Close CLICKTIGHT frame
Step 9. Press down until it locks into place.
If you need to apply excess force to
close the CLICKTIGHT frame, check
the shoulder/lap straps, harness
tongues and harness adjuster strap
(lower) are not trapped.
Step 10. Check if CLICKTIGHT frame is closed
by lifting the CLICKTIGHT FRAME up.
Your seat should feel secure.
Step 11. You are now ready to install top tether.
Refer to page 50.
Instructions for Installation & Use
49