Installation Of Vehicle Upper Anchor Point - Britax Safe-N-Sound BS3700A-C20133 Series Instruction Manual

ACCESSORIES
Long Vehicle
Seat Protector
(If supplied)
'A'
Pocket
Short Vehicle
Seat Protector
(If supplied)
'A'
Pocket
Note: Some Vehicle Seat Protector
may not have pockets.
68
Instructions for Installation & Use
VEHICLE SEAT PROTECTOR
(If supplied)
The Vehicle Seat Protector have been specifically
designed to protect your vehicle seat when
using your child seat.
Place pocket on edge of seat, smooth back
toward seat join ('A') and fit in any excess Vehicle
Seat Protector into the join of the child seat ('A').
CAUTION:
The Vehicle Seat Protector pocket is designed
for small, light items. To avoid damage do not
overload the pocket.

INSTALLATION OF VEHICLE UPPER ANCHOR POINT

Consult the vehicle owner's handbook for location of anchorage fittings or anchorage points
and the possible use of spacers. Some vehicles may have an anchor fitting fitted by the
vehicle manufacturer. If anchorage points cannot be found refer to car manufacturer or local
child restraint fitting station or traffic authority for optimum position of upper anchorage point
and the use of spacers.
TOP TETHER STRAP
IMPORTANT:
THE ATTACHMENT CLIP COVER MUST ALWAYS BE USED AS IT PREVENTS
THE RISK OF INCORRECT FITMENT OF THE ATTACHMENT CLIP TO THE
UPPER ANCHORAGE POINT. BEFORE EACH USE OF THE RESTRAINT ALWAYS
ENSURE THAT THE ATTACHMENT CLIP IS CORRECTLY ENGAGED TO THE
UPPER ANCHORAGE POINT AND NOT HOOKED TO OR FITTED TO, ANY
OTHER OBJECT. THIS IS ESPECIALLY IMPORTANT IN VEHICLES SUCH AS
STATION WAGONS, VANS, HATCH BACKS OR VEHICLES WITHOUT A FIXED
PARCEL SHELF, SINCE THE ANCHOR POINT IS USUALLY NOT VISIBLE.
IMPORTANT INSTALLATION NOTE:
In some vehicles the upper anchorage point in the rear vertical panel can only be installed in
one way. Please refer to vehicle owner's handbook or a child restraint fitting station for correct
method.
69
Instructions for Installation & Use