Top Tether - Britax Safe-N-Sound BS3700A-C20133 Series Instruction Manual

SETUP - TOP TETHER FOR FORWARD FACING
1
Press
2
Pull
3
4
Roll up
to store
5
50
Instructions for Installation & Use
HOW TO INSTALL THE TOP TETHER:
Step 1. Press top tether adjuster button and
Step 2. Lengthen top tether strap fully, ensure
all unnecessary twists are removed.
Step 3. Connect top tether attachment clip to
vehicle anchor fitting.
ENSURE THE TOP TETHER STRAPS ARE
NOT TWISTED.
Step 4. Pull top tether strap slack onto side of
adjuster.
Do not over tighten as it may cause
your child seat to lift.
ALWAYS REMOVE SLACK IN THE TOP
TETHER AND STORE STRAP.
Step 5. Roll up any excess strap and store in
the pocket provided on the top tether
strap.
SETUP - TOP TETHER FOR FORWARD FACING
CAUTION: CHILDREN CAN BE INJURED OR RESTRAINTS
AND TOP TETHER STRAP DAMAGED BY UNSECURED CARGO
IN A COLLISION. SECURE OR REMOVE HAZARDOUS CARGO
BEFORE USING THIS CHILD RESTRAINT.
IMPORTANT :
The top tether strap must be fitted at all times.
Always secure the loose end of the top tether strap to prevent it hanging out of the car or
being accessible by the child.
THIS RESTRAINT IS NOT SUITABLE FOR USE WHERE THE TOP TETHER STRAP MAY
FALL INTO A SPLIT IN THE SEAT BACK OR OFF THE SIDE OF THE SEAT.
ALWAYS ATTACH TOP TETHER HOOK AND REMOVE SLACK
IN THE TOP TETHER STRAP.
51
Instructions for Installation & Use