Anti-Rebound Bar (Select Models) - Britax MARATHON CLICKTIGHT User Manual

Anti-Rebound Bar (Select Models)

In the event of a crash, the anti-rebound bar is designed to
prevent rebound rotation in rear-facing car seat installations.
The anti-rebound bar is not intended for use as a carry
handle. Do not use the anti-rebound bar to carry this child
seat.
IMPORTANT:
forward-facing installation.
Installing the Anti-Rebound Bar
1. Open the CLICKTIGHT.
2. Pull back on the shell
cover behind the red
marker and locate the
open end of the structure
tube.
3. Insert one end of the anti-
rebound bar into the tube
as shown, then repeat for
other side.
4. Lift up on the anti-rebound
bar to ensure both ends
are properly set inside the
structure tubes.
NOTE: Closing the CLICKTIGHT will completely secure
the anti-rebound bar.
Removing the Anti-Rebound Bar
1. Open the CLICKTIGHT.
2. Grasp the anti-rebound
bar at both sides and pull
away from the child seat.
MARATHON CLICKTIGHT User Guide
The anti-rebound bar MUST be removed for
27