Reboundreduce Stability Bar; Models) - Britax Poplar Car Seat User Manual

ReboundReduce
(Select Models)
Do not use the stability bar to carry this child restraint.
IMPORTANT:
forward-facing installation.
Installing the ReboundReduce
Open the ClickTight.
1.
a. Lift the front cover
flap.
b. Squeeze the
ClickTight release
buttons.
2. Insert the stability bar
into the two openings
at the front of the seat.
3. Ensure the stability bar
released buttons are
completely engaged.
4. Pull the stability bar
away from child
restraint on both sides
to confirm connections.
Removing the ReboundReduce
Open the ClickTight.
1.
a. Lift the front cover
flap.
b. Squeeze the
ClickTight release
buttons.
2. Push the stability bar
release button and pull
the stability bar away
on one side. Repeat on
the other side.
3. Close the ClickTight.
20
TM
WARNING!
The stability bar MUST be removed for
Stability Bar
Stability Bar
TM
2
3
4
Stability Bar
TM
1
b
2
a