Replace Cover - Britax Safe-N-Sound BS3700A-C20133 Series Instruction Manual

CARE AND MAINTENANCE - REPLACE COVER
1
1
2
attach
clip inside
child seat
3
4
64
Instructions for Installation & Use
TO REPLACE COVER:
To replace CLICKTIGHT frame cover:
Step 1. Open CLICKTIGHT frame. Feed over
CLICKTIGHT button housing.
Loop elastics back on to clips
provided.
To replace cover:
Stretch the cover over the headrest
and harness adjuster button, pull
the adjuster strap through the cover.
Ensure none of the harness straps are
twisted.
Step 1. Recline child seat to reveal hook at the
lower front of the child seat and attach
elastic loops.
Step 2. Lift headrest to the highest position.
Open door at the back of the child
seat and attach elastic loops to hooks
provided.
Step 3. Open CLICKTIGHT frame and attach
clips as shown.
Step 4. Clip press studs to the CLICKTIGHT
frame cover found inside child seat.
CARE AND MAINTENANCE - REPLACE COVER
To replace headrest cover:
Step 1. Lift headrest to the highest position.
Step 2. Replace elastic behind headrest into
2
Step 3. Clip press studs and hook the clips
3
ONLY USE BRITAX
SAFE-N-SOUND SEAT COVERS
AND ACCESSORIES THAT ARE
DESIGNED AND TESTED FOR
USE WITH THIS PRODUCT.
VERY IMPORTANT:
Only replace the cover with Safe-n-Sound
supplied replacement cover with identical
shoulder height markers or a replacement cover
meeting AS/NZS 8005.
Stretch headrest cover over headrest.
the recess.
under headrest wings.
65
Instructions for Installation & Use