M&C PSS Series Instruction Manual page 35

Install the sample gas tubes and the condensate tube as follows:
• Remove the union nut from the clamping ring tube fittings by turning it anti-clockwise. The nut
should be removed from the thread with great care so as to ensure that the loose sealing ring in
the nut is not lost.
• Place the union nut over the connecting tube.
• Place the sealing ring over the connecting tube with the thicker bead towards the nut.
• Place the tube over the nipple on the thread.
N O T E
• Tighten the union nut hand-tight.
The tube will no longer be able to slip off, and is now compression-proof.
Disassemble the tubes in reverse order.
W A R N I N G
www.mc-techgroup.com
The tightness of the connections can only be guaranteed if the
connecting tube has a straight rim (hose cutter).
Aggressive condensate possible.
Wear protective glasses and proper protective clothing!
PSS-5C | 1.02.02 35