M&C PSS Series Instruction Manual page 14

Options
Sample tube
Electronic
temperature controller
for max. 12 m [39.4 ft]
heated sample line
100 W/m
Electronic tempera-
ture controller for max.
6 m [19.7 ft] heated
sample line 100 W/m
Connecting adapter
DN 4/6 for heated
sample line
Connecting adapter
DN 6/8 for heated
sample line
Sample gas pump
N5 KPE, replacement
Sample gas pump
N9 KPE, replacement
Flow meter including
sample gas outlet,
max. 2 pieces
14
Type
Sample tube out of Kanthal® ø 6 mm, length: 1 m, sampling
temperature: max. 1300 °C [2372 °F]
701 control range: 0 to 200 °C [32 to 392 °F], inlet PT100, power:
230 V/50 Hz, contact capacity: 250 V AC max. 10 A, completely
mounted incl. 7-pin plug 10 A
701 control range 0 to 200 °C [32 to 392 °F], inlet PT100, power:
115 V/60 Hz, contact capacity: 250 V AC max. 10 A, completely
mounted incl. 7-pin plug 10 A
PSS-5C connecting adapter with anti-kink protection for rigid
mounting of heated sample line with replaceable PTFE tube DN
4/6, consisting of special Swagelok fitting with 4 mm support
sleeve, material: SS316Ti
PSS-5C connecting adapter with anti-kink protection for rigid
mounting of heated sample line with replaceable PTFE tube DN
6/8, consisting of special Swagelok fitting with 6 mm support
sleeve, material: SS316Ti
Extra charge for replacing the standard N3 KPE by the N5 KPE 01G9090
Extra charge for replacing the standard N3 KPE by the N9 KPE 01G9095
FM40 7-70 Nl/h air
FM40 15-150 Nl/h air
FM40 25-250 Nl/h air
FM40 50-500 Nl/h air
PSS-5C | 1.02.02
Part No.
01G9030
01G9055
01G9055a
01G9060
01G9061
01G9072
01G9077
01G9082
01G9087
www.mc-techgroup.com