Supply Connections; Tube Connections; Figure 13 Pss-5C And Pss-5/3C Medium Connections - M&C PSS Series Instruction Manual

18

Supply connections

18.1

Tube connections

N O T E
Figure 13 shows the possible medium connections. These are located in the right-hand side of the
gas conditioning case at the rear in a specially immersed assembly frame.
1 Sample gas IN
2 Power supply
3 Heated sample line connection
4 Condensate outlet
Figure 13 PSS-5C and PSS-5/3C medium connections
All tube connections are equipped with 4/6 mm clamping ring tube fittings made of
polyvinylidenfluoride (PVDF) for gas inlet temperatures of up to a maximum of 80 °C [176 °F] (see
chapter '9 Technical data'). When heated sample lines are used, the gas inlet temperatures can
increase up to a maximum of 180 °C [356 °F]. In this case, the use of optional stainless steel bulkhead
fittings is recommended.
Connecting tubes of dimension 4/6 mm are used as standard.
34
Do not switch tube connections; connections are marked
accordingly.
After all lines have been connected, the tightness must be
checked.
5 Connections description
6 Type plate
7 mA-output (temperature)
8 Flow meter(s) with sample gas OUT
PSS-5C | 1.02.02 www.mc-techgroup.com