Silicon Graphics Reality Center Installation Manual page 57

Configurations
10
11
Necessary Equipment and Cables
The following cables are included to set up this configuration :
Cable type 1
Cable type 2
Cable type 3
Cable type 4
Cable type 9
Cable type 10
The following extra equipment is necessary to set up this configuration :
All these peripherals are mounted in a RACK, and delivered as one unit. The order numbers and quantities are only given as information
for after sales orders.
MAGIC interface
RCVDS05
Quad Splitter
Quad Switcher
VSE40
Hint
As there is no power switch on the system, use socket strips with power breaker to connect the projectors and the RACK to the
wall outlet.
Internal Connections RACK system 2-channel system
All internal connections are indicated on the drawing with 'con' and a number. This indication can be found back in the connection
table below.
S68FÆ’†‡r€
p‚Ã#
p‚Ã"
p‚Ã!
RˆhqÃTƒyv‡‡r…
p‚Ã
8-20
To extra computer output
To extra monitor
Description
RS232 communication cable 6.5ft
5 BNC to 5 BNC coax cable 15m/50ft
13W3 to 4 BNC 4.6ft
5 BNC to DD15male 6.5ft
5 BNC to 5 BNC 5m 15ft
RS232 communication cable 15m 50ft 5
BNC-BNC coupling pieces
2x R9828121 (230V) or R9828128 (120V) according to the ordered destination kit.
2x R9828700 (230V) or R9828709 (120V) according to the ordered destination kit.
2x R9828300 (230V) or R9828309 (120V) according to the ordered destination kit.
1x R9828311 (230V) or R9828319 (120V) according to the ordered destination kit.
1x R9828520 (230V) or R9828529 (120V) according to the ordered destination kit.
S8W9T$
S8W9T$
p‚Ã%
p‚Ã$
WT@Ã#
Cable type 4 + cable type 2
Cable type 4 + cable type 2
Quantity Order number
1 Z348755
4 Z348333
2 Z348261
2 K344073
2 Z348332
Z3482602
8 R313667
RˆhqÃTv‡pur…
L F
D J
p‚Ã 
0
p‚Ã'
L F
D J
p‚Ã(
0
p‚Ã&
RˆhqÃTƒyv‡‡r…
R5976280 RC3300W 19072001