3-Channel Configuration Stereo With Audio Option - Silicon Graphics Reality Center Installation Manual

Configurations

3-channel configuration stereo with audio option

Principle drawing
TBDÃH‚v‡‚…
T‡r…r‚ˆ‡
8uhryÃ
21<;
8uhryÃ
8uhryÃ!
The source connections are the same as for 'Base configuration for 3-channel stereo'.
Audio connection is done with an extra delivered cable type 11. This cable connects the audio source with the built-in audio amplifier
in one of the projectors.
The speakers, mounted on the sides of the system should also be connected to the amplifier output with cable type 12.
Remark
One channel output from the ONYX split can be displayed on a monitor.
To display another channel, the user must manually plug the monitor cable into the corresponding MAGIC of that channel.
Necessary Equipement and Cables
The following cables are included to set up this configuration :
Cable type 1
Cable type 2
Cable type 3
Cable type 4
Cable type 5 (*)
Cable type 6
Cable type 7
Cable type 8
Cable type 11
Cable type 12
(*) extra cable 1 BNC to 1 BNC 45m 150ft is included with the stereo option in case this stereo option is used in combination with
the long cable option (Z3483105).
8-16
8hiyrÇ’ƒrÃ#
ÃphiyrÇ’ƒrÃ!
8h iyrÇ’ƒrÃ' 8hiyrÇ’ƒrÃ$
F
J L
0 D
8hiyrÇ’ƒrÃ!
8hiyrÇ’ƒrÃ"
F
J L
0 D
8hiyrÇ’ƒrÃ" 8hiyrÇ’ƒrÃ!
F
J L
0 D
8hiyrÇ’ƒrÃ" 8hiyrÇ’ƒrÃ!
6ˆqv‚Æ‚ˆ…pr
Description
RS232 communication cable 6.5ft
5 BNC to 5 BNC coax cable 15m/50ft
13W3 to 4 BNC 4.6ft
5 BNC to DD15male 6.5ft
1 BNC to 1 BNC 20m 65ft
1 BNC to 1 BNC 1.65m 5.4ft
1 BNC to 1 BNC 0.5m 1.6ft
Connection piece D9 - BNC
Audio cable
Audio cable
BNC-BNC coupling pieces
T-BNC coupling pieces
8hiyrÇ’ƒrÃ%
8hiyrÇ’ƒrÃ&
8uhryÃ
8hiyrÇ’ƒrÃ
8hiyrÇ’ƒrÃ
8hiyrÇ’ƒrÃ
Quantity Order number
2 Z348755
3 Z348333
2 Z348261
1 K344073
1 Z3483102
2 Z3483353
2 Z348310
1 Z3487291
1
2
4 R313667
1 B332119
8hiyrÇ’ƒrÃ%
8hiyrÇ’ƒrÃ&
T‡r…r‚Ãr€v‡‡r…†
Ah†‡Ãƒu‚†ƒu‚…Ljir†
8uhryÃ!
8uhryÃ
!
8hiyrÇ’ƒrà !
7ˆvy‡v
6ˆqv‚ƈƒƒy’
Ãh€ƒyvsvr…
8hiyrÇ’ƒrÃ
R5976280 RC3300W 19072001